HTH RAPIDFLOC  3L

HTH Rapidfloc is the ideal product to clear a very cloudy swimming pool. It binds together large amounts of suspended debris and drops it to the pool floor. it can then be vacuumed to waste.

• Concentrated source of aluminium floc
• Removes dead algae following shock treatment
• No pre-dissolving required

Instructions for HTH RAPIDFLOC

Calculate the volume of water in the pool.

Dose @ 250ml of product per 10m3

Once floc has settled on the pool floor, carefully vacuum as much as possible to waste - removing any remainder by normal filtration.

Caution: Do not run the filter when using RAPIDFLOC

NOTE - For liner swimming pools, please refer to the manufactures operating guidelines.

To clear the cloudy water while the pump is running use

Warning: Do not use together with other products. May release dangerous gases (chlorine).

Precautions: Never mix chemicals, except by dosing into the pool separately and at different times. Never add chemicals to the water when bathers are in the pool. Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents, eg, petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.

Disposal When empty and providing it has been rinsed out on the pool. This container may be disposed of via your household recycling.